1 USB 5 D-Sub RBG W R RS232 D-Sub 9 2 2 Y RBG 6 5 7 8 1 4 3 HDTV adapter D-Sub D-Sub USB Y 2 E62405SP R : English Quick Start 1 1 INSTALLATION 1. Power cord 2. VGA cable 3. VGA to component video/HDTV adapter 4. Composite video cable 5. Audio cable 6. S-Video cable 7. RS232 cable 8. USB cable 9. 3 RCA component cable Note: Connector interface is subject to model's specifications 1. 2. VGA 3. VGA /HDTV 4. 5. 6. S 7. RS232 8. USB 9. 3 RCA : 2 INTERFACE CONNECTOR Connecting to a Computer 2 1. Ensure the projector and your computer are turned off. 2. Connect one end of the VGA cable to the "VGA IN" connector on the projector; connect the other end to the VGA connector on the computer and tighten the screws. 3. Connect one end of the power cord into the AC power socket on the projector; connect the other end to an electrical outlet. Powering On the Projector 1. 2. VGA VGA IN VGA 3. AC 1. Remove the lens cap. 2. Turn on the projector first and then the computer. 3. Adjust the position, focus and zoom. 4. Run your presentation. Powering Off the Projector 1. 2. 3. 4. 1. Press the power button twice. 2. Do not remove AC power cord from outlet until the projector fans shut down. 1. 2 2. AC ...